Disable the log encryption setting with SP9730-004 ('0' is off.) 2.

Damaged log data file in the HDD Initialize the HDD with SP5832-004.

This can be caused by switching the machine off while it is operating.

Remedy: Turn the main switch off/on and try the operation againĪn error was detected in the handling of the log data at power on or during machine operation.

Description: Delete All error 2: Data areaĪn error is detected while all of the HDD or NVRAM are formatted logically by the Data Overwrite Security Unit (D377).

Install the DataOverwriteSecurity Unit (D362).

Data Overwrite Security Unit (SD card) not installed.

The PFGATE ON signal still asserts when the next job starts.An error is detected while all of the HDD or NVRAM are formatted physically by the Data Overwrite Security Unit (D377). The PFGATE ON signal still asserts within 5 seconds after processing the image in normal job or MUSIC for end position.

The PFGATE ON signal still asserts when the next job starts. He PFGATE ON signal still asserts within 5 seconds after processing the image in normal job or MUSIC for end position. Poor connection between controller and BICU. The PFGATE ON signal does not assert within 5 seconds after processing the image in normal job or MUSIC for start position. Check the connection between the controller board and the BCU.

Poor connection between controller and BICU.

The PFGATE ON signal still asserts when the next job starts.

The PFGATE ON signal still asserts within 5 seconds after processing the image in normal job or MUSIC for end position.

Ricoh mpc2551 legend